Electroninks launches silver ink for PTFE-based medical devices
Electroninks is moving into biomedical devices with a new silver ink designed to bond to PTFE, a material widely used in catheters and other medical devices but hard to print on. The company says the application could help manufacturers add sensing and conductive functions directly onto devices without high-temperature processing.
Why it matters: - Electroninks is targeting a major manufacturing bottleneck in biomedical devices: getting conductive materials to adhere to PTFE. - The new application could let device makers add sensing and electronics directly to PTFE-based components, which may support smaller and more capable medical devices. - The company says the technology is now available for customer evaluation and integration.
What happened: - Electroninks announced UTD-Ag-60PA silver ink from its UT Dots product line for advanced electronics and sensing on difficult medical-device substrates. - The application is aimed at biomedical devices that use PTFE, including catheter-based technologies. - The announcement identifies a pressure-sensing coronary guidewire as one of the leading use cases.
The details: - PTFE is used in medical devices because of its chemical stability, low friction and biological tolerance. - PTFE’s very low surface energy has historically made it difficult to print or bond materials to the surface. - Electroninks says its materials are designed to adhere reliably to PTFE substrates. - Avery Gerber, sales representative at Electroninks, said the company’s UTD-Ag-60PA silver ink bonds reliably to PTFE and that its low-temperature gold inks extend the capability to substrates that cannot withstand conventional gold processing. - The pressure-sensing coronary guidewire is used in cardiac procedures. - The guidewire’s sensing system helps physicians navigate a coronary artery, measure pressure beyond a narrowing or blockage and assess the severity of the narrowing. - The company says those capabilities depend on reliably integrating conductive sensing elements onto the guidewire’s PTFE-based construction. - Electroninks says device makers can use the materials to work around PTFE’s low surface energy, integrate sensing functionality directly onto PTFE-based devices as a conductive band, and design more compact devices without conventional high-temperature processing or PVD methods. - Melbs LeMieux, co-founder and president, said the medical-device use confirms a new market for Electroninks and validates the company’s quality and execution.
Between the lines: - The move expands Electroninks beyond semiconductor packaging and broader electronics into a regulated medical-device segment with tighter performance requirements. - The announcement also signals a push toward direct material integration, which can reduce steps in device manufacturing and may lower design constraints for engineers.
What's next: - Electroninks says the medical-device materials are available now for customer evaluation and integration. - More information is available at Electroninks products and solutions.
The bottom line: - Electroninks is pitching its silver ink as a practical way to make PTFE-based medical devices easier to manufacture and more functional.
Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.
Sign up for:
Science & Technology Watch
The daily local news briefing you can trust. Every day. Subscribe now.
Check Your Email!
We sent a one-time activation link to: .
Confirm it's you by clicking the email link.
If the email is not in your inbox, check spam or try again.
Welcome back!
is already signed up. Check your inbox for updates.